玄幻小说排行榜,小说阅读网,女强穿越玄幻完结小说

How to charge BYD lithium battery forklift-

Avoid closed areas, or maintain the ventilation and drainage performance of the closed system, open the ventilation window to maintain the heat dissipation and ventilation performance of the motor, open a leakage hole at the bottom of the battery box or install a reservoir

8-46 tons, including small tonnage below 5 tons, large tonnage of 5-18 tons, and heavy load of 20-46 tons Parking (1) Release the direction select switch

The load capacity is 1

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

3 AC drive motor, without carbon brush, basically requires no maintenance, reducing maintenance costs

Since the existing magnetic stripe navigation and laser navigation have certain limitations, and visual navigation reduces some problems encountered in the implementation of the project through dynamic route planning, visual navigation is the development trend of future navigation

Cause: The charger operating voltage is out of regulation or faulty

Forklift tonnage configuration

Do you know how to use an electric forklift? Electric forklifts can reduce our labor burden, but if we use them improperly, they can also cause personal and property losses If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

The staff who heard the abnormal noise did not take the corresponding emergency measures in time, resulting in the shaft being scrapped

When the vehicle is moving, do not mistake the "forward" and "reverse" direction buttons for the turn buttons; 6

If it is insufficient, charge it in time

How to charge BYD lithium battery forklift- The emergence of lithium batteries has added highlights to the development of the forklift industry! In the future, forklift batteries will dominate and create a new future for warehousing and handling equipment Fast charging speed, it can be charged in 1-3 hours, which can save time for enterprises In the new "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the regular inspection cycle of forklifts will be adjusted from the original 1 year to 2 years

In the industrial vehicle industry, BYD has made the greatest contribution to the use of lithium batteries in forklifts

At present, most batteries used in forklifts are lead-acid batteries, but they are gradually being replaced by lithium batteries

Forklift drive

Low temperature resistant grease In order to prevent the hardening phenomenon caused by low temperature, the working hydraulic oil uses special hydraulic oil that changes its viscosity characteristics under low temperature environment, and the lubricating grease should also be selected with good low temperature characteristics

Unlike internal combustion forklifts, electric forklifts are mainly powered by electricity (powered by forklift batteries), and the processing accuracy and automation are significantly improved, which greatly reduces the labor intensity of operators

There are two installation methods for the travel motor: vertical and horizontal motors

The essential characteristics of lithium iron phosphate batteries and their relatively high safety and high efficiency have promoted the scope of use and application of BYD forklifts

, jointly invested in the establishment of Hangzhou Pengcheng New Energy Technology Co

Iron batteries are fully enclosed and do not require manual maintenance and servicing, and do not require regular refilling of electrolyte

After years of practical experience and market accumulation, BYD Forklift has become a leader in logistics and handling solutions in many industries, and has been highly recognized by customers, helping the green development of logistics and industrial acceleration of industry enterprises

Product Introduction: 1

How to charge BYD lithium battery forklift- In order to reduce the occurrence of failures and extend the service life of the forklift, regular maintenance is very necessary

After the engine is started, it usually has enough warm-up time to operate at low speed and low load until the engine, transmission, hydraulic system and heated oil are finally driven

4 Easy maintenance: The easier it is to operate and maintain, the less worry and more assured customers will feel

After a careful inspection, we can usually find that the abnormal noise of the electric pallet truck is caused by damaged parts or maintenance

Some leading forklift companies with keen market sense have also quickly captured this trend and have taken action

The new version of the regulations requires the installation of safety monitoring devices

Non-drivers are strictly prohibited from sitting on the forklift while the vehicle is in motion

(2) The load height must not block the driver’s view

Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

Cause: The charger's operating voltage is out of regulation or faulty, or the battery is faulty

(5) Readjustment of air gap: The rated air gap Z will increase due to wear

There are specification restrictions for the use of electric pallet trucks and pallets

The emergence of lithium battery forklifts is a general trend

欧美成人高清在线视频大全-欧美成人高清性色生活-欧美成人高清视频-欧美成人高清-在线观看欧美国产-在线观看男女爱视频网站

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info