遮天,欢乐颂小说,魔天记忘语小说

BYD clamp forklift maintenance standard-

The battery is the power source of the vehicle and should be charged in time and maintained regularly

If the driving control switch is loose and causes failure, lock it in time When the operation is smooth, turn the handle of the electric pallet truck left or right to change the direction These reflected that the company lacked basic safety management, employee safety training and education were not in place, work systems were poorly implemented, and employees had very weak safety awareness Warm reminder: In addition to common models, non-standard customization can also be carried out according to the user's site, environment, cargo, and load to meet the needs of special environment

If the lifting height of the fork does not reach the required height, add hydraulic oil

Fault 3: Slow lifting speed or failure to lift Generally, it is because the oil tank is low in oil, and hydraulic oil needs to be added in time or replaced directly

Moreover, Chongqing's economy is developing faster and faster, and the industry is becoming more and more mechanized, simplifying the work process, reducing work obstacles, and improving the working environment, making electric forklifts popular

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

Therefore, when using an electric transport truck, it must be used in a standard manner, and at the same time, attention must be paid to its maintenance and care to extend its service life

What should you pay attention to when buying a forklift? There is no industry standard in our forklift market yet

The ergonomically designed control handle of the electric transport truck is convenient for left-handed operation and improves driving comfort

In today's warehouses, four- or five-meter-high through-type shelves are a common configuration

BYD clamp forklift maintenance standard- At an ambient temperature of -20℃, extremely high requirements are placed on the normal operation of forklifts, and continuous technological innovation is needed to cope with and solve various technical problems of cold storage forklifts 1 What are they? Common power system failures are mainly manifested in failure to charge, charging voltage is too low, and charging voltage is too high The S2

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

Hydraulic oil, gear oil, and lubricating oil all use special low temperature resistant grease, which can enable the vehicle to obtain long-term stable hydraulic and transmission performance in the cold storage Drive device with brake It is equipped with an electromagnetic powered brake, a travel motor, a gear box and a driving wheel, and a steering bearing is arranged between the driving motor and the gear box If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident

Therefore, there are still many advantages of using lithium batteries in forklifts

The three verticals and three horizontals in the "New Energy Vehicle Industry Development Plan (2021-2035)", the "three verticals" refer to pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles

The normal height is about 3 meters, and the high height is more than 10 meters

Check the appearance

The unmanned forklift moves to the loading point by moving straight, sideways, turning, etc

BYD clamp forklift maintenance standard- One common sign is abnormal noise

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

When maintaining an explosion-proof electric forklift, you should follow strict maintenance regulations, use the correct lubricating oil, and check each component of the forklift to ensure the safe and reliable operation of the equipment

(1) Ordinary internal combustion forklifts: They are generally powered by diesel, gasoline, liquefied petroleum gas or natural gas engines

When the warehouse electric forklift forks goods onto the shelf, it should slow down and pay attention to the height of the double forks

So what are their specific functions? Let the BYD forklift editor share with you: What are the functions of BYD forklifts? 1 Because it is pollution-free and has low noise, it is widely used in indoor operations and other working conditions with high environmental requirements, such as the pharmaceutical and food industries

At the same time, the Forward-looking Industry Research Institute also provides solutions such as industrial big data, industrial research, industrial chain consulting, industrial maps, industrial planning, park planning, industrial investment promotion, IPO fundraising and feasibility study, IPO business and technology writing, and IPO working paper consulting

Not charging Phenomenon: When the electric stacker is charging normally, the charger light does not turn red, indicating that the battery is not charging The unmanned forklift moves to the corresponding point in the shelf area through straight-moving, sideways movement, turning and other actions according to the instructions of the WCS warehouse control system

If there is no float, check whether the distilled water is level with the bottom of the distilled water bottle

欧美成人高清在线视频大全-欧美成人高清性色生活-欧美成人高清视频-欧美成人高清-在线观看欧美国产-在线观看男女爱视频网站

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info