怎样写网络小说,大主宰天蚕土豆,小说

BYD ECB60 New energy forklifts Agent

It has low cost, but low storage efficiency and poor scenario applicability

After starting the electric transport truck normally, press the handle of the electric transport truck with both hands to between 90° and 180°

In September 2019, Anhui Heli also invested in the company with the aim of promoting its layout of the lithium battery new energy forklift industry chain

When performing fill welding, it is recommended to use DC reverse polarity arc welding

Check whether the electronic control board is damaged

Electric transport forklift manufacturers emphasize that the maintenance cost of electric forklifts is very important for the normal life cycle, otherwise the battery is not powerful and the progress of the work is affected

The forks are two forged forks bent at 90°, mounted on a sliding bracket, and are used to carry materials When the vehicle is trudging, do not mistake the "Trudge" and "Evacuate" direction buttons for the turn buttons; 6 If any abnormality is found during the forklift operation, the principle of "stop and wait" must be followed

6 operating speed Automatically guiding the maximum speed that an electric truck can achieve when driving under a rated load is an important parameter that determines the vehicle's operating cycle and transportation efficiency

Battery maintenance is also very important, and there are many details that need to be paid attention to

The raised part will hit the timing gear on the camshaft, causing abnormal engine noise No matter how much the forklift costs, you can't buy it casually when buying batteries

Unlike internal combustion forklifts, electric forklifts are recommended to be used on hard, flat surfaces

The reach truck is similar to the leg-type forklift in that the center of gravity of the goods falls within the support plane of the vehicle, so it has good stability

BYD ECB60 New energy forklifts Agent

Safety testing plan The system safety inspection of intelligent three-dimensional storage is a prerequisite for the normal operation of the project and is also a key design object

The net height in the container is required to be less than 2 So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

The operation using pallets is efficient, safe and stable, so it has now been widely used in production, transportation, warehousing and other fields

Save costs

In general, electric transport truck manufacturers recommend that companies choose nine-legged pallets and Sichuan-shaped pallets

The cold resistance reaches minus 40℃, and it can work normally under high temperature to 60℃

It will be much easier to drive after mastering it

(10) It is not allowed to use the inertia of braking to release objects

8-46 tons, including small tonnage below 5 tons, large tonnage of 5-18 tons, and heavy load of 20-46 tons

What are the advantages of lithium battery forklifts? With the development of society and the advocacy of environmental protection in various places, there are more and more energy-saving products on the market Electric counterbalanced ride-on forklifts and electric ride-on warehouse forklifts still have a lot of room for improvement 1

The maximum lifting height [3] refers to the maximum vertical distance between the horizontal section of the fork or the upper surface of the lifting platform and the ground; the maximum deflection of the fork end refers to the maximum linear displacement of the fork end in the vertical direction when the fork is at rated load and maximum travel

BYD ECB60 New energy forklifts Agent

Generally speaking, the larger the load capacity of a forklift, the more expensive it is

Strictly follow the following rules: The following is shared by BYD Forklift Editor: 1

What are the main considerations when choosing a pallet for an electric transport truck? We first need to consider the specifications and dimensions of the goods, such as the size of the outer packaging of the goods, the way it is placed on the pallet, and the weight and height of the goods Check the reversing buzzer and hazard warning lights; 7

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

If the water level is lower than the standard level, distilled water should be added appropriately

Before continuing to operate, the direction selection switch must be restored to the middle position

PU polyurethane wheel: iron core coated with rubber, quiet, good wear resistance, not easy to damage the ground, suitable for painted floors If an accident happens, the consequences will be disastrous

BYD forklift provides a long 5-year warranty period for rechargeable batteries

3 meters, and at least two masts are required; but the lifting height of the forklift will conflict with the mast height

Generally, electric forklift manufacturers will recommend customers to use electric forklifts in a suitable environment

欧美成人高清在线视频大全-欧美成人高清性色生活-欧美成人高清视频-欧美成人高清-在线观看欧美国产-在线观看男女爱视频网站

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info