将夜猫腻小说,穿越小说排行榜,懒人听书

BYD high-lift forklift is out of power- When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4 The body design of the electric transport truck is suitable for the workplace and has a good service life

Are you clear? Please pay attention to our official website to get more information about BYD forklifts

The forks are two forged forks bent at 90°, mounted on a sliding bracket, and are used to carry materials

An electric forklift with excellent quality and simple operation is also very important

If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving

Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

Equipment transportation by electric trucks

One is screw connection, which is relatively simple

The double forks should be inserted in parallel, and the pallet should not be distorted for operation

Hold the left and right handles of the control handle with both hands, press them down to the tilted position, and move the control handle left and right to steer the vehicle

BYD high-lift forklift is out of power- 4

In the future, they will replace internal combustion forklifts and manual forklifts and become the backbone of logistics equipment

(12) When a forklift is carrying cargo downhill, it should drive in reverse to prevent the cargo from falling off The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

The first reason is that the battery plates are oxidized

The following is shared by BYD Forklift Editor: 1

The plate is a very important part of the battery

Warehousing: Warehousing forklifts are mainly designed for handling goods in warehouses

The front overhang of a forklift refers to the distance from the center of the forklift's front wheel to the fork arm of the forklift's forks

The truck is designed to be "Li-ion Ready" with its controller automatically identifying the battery chemistry (lithium-ion vs

It is worth mentioning that in November 2019, Zhuoyi Forklift broke through foreign technology blockades and parts controls, and launched China's first "VDA three-way stacking forklift" equipped with an electric three-way forkhead for narrow channel dense storage scenarios, China's first 3-ton "RSEW multi-directional reach forklift" and "RRE double-reach reach forklift", which attracted the attention of the industry

Another manifestation is that the discharge capacity will decrease significantly 2

BYD high-lift forklift is out of power-

The indoor use of the vehicle is very important

First, let's look at the raising and lowering

It uses a small-volume hydraulic device, which is simple to operate and easy to use

Therefore, it is very necessary to check and deal with these minor problems

Warehouse electric forklifts should slow down when turning, pay attention to the contact and collision between the goods in front and the rear of the vehicle, and turn slowly

The minimum turning radius refers to the minimum distance from the outermost and innermost sides of the vehicle body to the center of the turn when the electric forklift is unloaded, driving at a low speed, and turning the steering wheel fully

Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

Repeated operation experience is required to achieve proficiency, accuracy and safety

At this time, the plate will appear rotten, and the active material will form blocks and accumulate between the two separators, resulting in a decrease in the capacity of the battery

Controlling the operating speed can control the magnitude of the travel motor force

(12) When a forklift is carrying cargo downhill, it should drive in reverse to prevent the cargo from falling off

The load range of electric transport trucks is relatively wide, ranging from one ton to ten tons

欧美成人高清在线视频大全-欧美成人高清性色生活-欧美成人高清视频-欧美成人高清-在线观看欧美国产-在线观看男女爱视频网站

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info